Removing a Badge With a Hair Dryer

If you have a badge that is attached with adhesive, then you need heat to soften the adhesive. You can get heat from different sources including a hair dryer. If you choose to use a hair dryer, then you can easily use it to soften up the adhesive that connects the badge.

When blowing the hair dryer on the badge, you have to make sure that the heat is steady and even on the badge. Make sure that it is a few inches above the badge while you are moving it back and forth blowing the hot air.

One thing you want to do is make sure all of the badge is getting the heat. Otherwise, the adhesive will not loosen all the way. You want all of the adhesive to loosen. As you are loosening the adhesive, you can wiggle the badge to see if it is loose enough.

 

 

Categories: New Inventory